TINT REBEL
Expert Installation Manual
Revolutionary Tape-Edge Technology
Tint Rebel uses innovative tape-edge technology that eliminates bubbles and makes installation incredibly simple. Only the top edge adheres to your window!
⏱️
1-2 Minutes
Installation takes only 1-2 minutes per window
🔄
Reusable
Remove and reinstall unlimited times
🛠️
No Tools
Only clean hands needed - no tools or water
Installation Video Coming Soon
Watch our step-by-step installation video
1
Prepare the Film
- Remove the protective layer covering the tint film
- Handle carefully - avoid touching the tint surface
- Identify the tape strip along the top edge of the film
2
Position From Inside
- Get inside your vehicle
- Position the film against the window from the interior side
- Align carefully to match the exact window dimensions
- Make sure the tape strip is at the very top
3
Attach the Top Edge
- Press the tape strip firmly against the top edge of the window
- Apply pressure along the entire top edge
- Ensure the tape adheres completely
- Check alignment before proceeding
4
Set the Film
- Lower the window completely to the bottom position
- Raise the window slowly back to the top position
- The entire film will position itself against the window
- Film should lay flat against the glass
5
Final Check
- Inspect the film placement
- Ensure complete coverage
- Check that edges align properly
- Verify tape is secure at top
1
Start Removal
- Lower the window slightly (about 1 inch)
- Carefully peel the tape from the top edge
- Pull the film down gently
- Remove completely - no residue left behind
2
Storage for Reuse
- Keep film flat
- Store in original packaging if available
- Protect from dust and dirt
- Ready for reinstallation anytime
🔧
Film Not Laying Flat
- Check tape adhesion at top edge
- Repeat window up/down movement
- Ensure proper alignment
🔧
Poor Tape Adhesion
- Clean top window edge if necessary
- Press tape more firmly
- Check for dirt or debris
🔧
Misalignment
- Remove carefully
- Reposition and try again
- Film is completely reusable
Installation Checklist
Protective layer removed
Film positioned from inside vehicle
Tape pressed firmly at top edge
Window lowered completely
Window raised completely
Final alignment checked
Quality Check
Film lies flat against glass
Top tape securely attached
Even coverage across window
Easy to remove when needed
Need Help?
Our support team is here to help you with installation